Clicq-Pression™ Transfer Abutment | Starter Kit compatible with Highness® HS-I Ø3.2 - Ø3.5 CC NP/Mini
Edison Medical · #114070-100-1210 · source
Clicq-Pression™ Transfer Abutment | Starter Kit compatible with Highness®
Fits with: Highness® - HS-I Ø3.2 - Ø3.5 CC NP/Mini Platforms: NP Material: Not Applicable (Multiple) Recommended Torque Tightening: 20 NCM for Temporary | 22 NCM for Permanent Required Screwdriver: 0.5" | 1.25mm Hex
What's included?
Straight Clicq™-Pression Abutment | Short cone 1.5 mm Height - 3 pcs Straight Clicq™-Pression Abutments | Short cone 3 mm Height - 3 pcs Straight Clicq™-Pression Abutments | Short cone 4.5 mm Height - 3 pcs
Straight Clicq™-Pression Abutment | Medium cone 1.5 mm Height - 3 pcs Straight Clicq™-Pression Abutments | Medium cone 3 mm Height - 3 pcs Straight Clicq™-Pression Abutments | Medium cone 4.5 mm Height - 3 pcs
Straight Clicq™-Pression Abutment | Long cone 1.5 mm Height - 3 pcs Straight Clicq™-Pression Abutments | Long cone 3 mm Height - 3 pcs Straight Clicq™-Pression Abutments | Long cone 4.5 mm Height - 3 pcs
15° Degrees Clicq™-Pression Abutments | Large Cone 1.5 mm Height - 3 pcs 15° Degrees Clicq™-Pression Abutments | Large Cone 3 mm Height - 3 pcs
25° Degrees Clicq™-Pression Abutments | Large Cone 1.5 mm Height - 3 pcs 25° Degrees Clicq™-Pression Abutments | Large Cone 3 mm Height - 3 pcs
TAP-AN-S | Short Abutment Analog for Clicq™-Pression Abutment - 3 pcs TAP-AN-M | Medium Abutment Analog for Clicq™-Pression Abutment - 3 pcs TAP-AN-L | Long Abutment Analog for Clicq™-Pression Abutment - 3 pcs
TAP-PT | Snap-on plastic transfer - 15 pcs
TAP-HA-S | Short Peek healing abutment for Clicq™-Pression Abutment - 3 pcs TAP-HA-M | Medium Peek healing abutment for Clicq™-Pression Abutment - 3 pcs TAP-HA-L | Long Peek healing abutment for Clicq™-Pression Abutment - 3 pcs
HSDA-SV-L | Long manual screwdrive 1.25 mm hex - 1 pcs
Main Advantages
Enables taking a more accurate impression Enables taking a full arch / mouth impression Could be used as a final abutment Titanium Nitride (TiN) coating finish Cost Effective – can be reused several times Time efficient
Related Products
Snap-On plastic transfer is included Peek healing cap can be purchased separately Abutment Lab Analog can be purchased separately Castable waxing sleeves can be purchased separately
Your selectionClicq-Pression™ Transfer Abutment | Starter Kit compatible with Highness® HS-I Ø3.2 - Ø3.5 CC NP/Mini
Product Information
| Manufacturer | Edison Medical |
|---|---|
| Torque | 20 Ncm |
| Diameter | - |
| Material | Not Applicable (Multiple) |
| Quantity | 3 |
| Connection | Highness® - HS-I Ø3.2 - Ø3.5 CC NP/Mini |