Glaze & Stain | BAOT PFM Stain Glaze Metal Ceramics

Introduction

Stain is used to enhance the color and appearance of restorations, allowing for custom shading to achieve a natural look that mimics real teeth. While Glaze is a dental procelain finish applied to restorations, providing a smooth, shiny surface that enhances aesthetics.

Specification

Category: Stain, Glaze

State: Powder

Packages: 3g (Stain), 15g (Glaze)

Shades:

• Stain: S-1A/S-1B/S-1C/S-1D/S-1A 011/S-1A 012/S-1B 021/S-1B 022/S-1B 023/S-1B 024/S-1C 031/S-1C 032/S-1D 041/S-1D 042/S-1D 043/S-1D 044/S-1D 045
• Glaze: G-1/G-1A(fluorescent)

Firing Parameters

Parameter	Bond	Opaque	Margin	Body*	Add On	Glaze & Stain
Initial Temp.(°C)	550	550	550	550	550	550
Drying Temp.(min)	2	3	3	3	2	2
Heating Time(min)	2	3	3	3	2	2
Heating Rate (°C/min)	60	60	55	55	55	55
Firing Temp.(°C)	960	940	930	920	910	890
Holding Time(min)	1	1	1	1	1	1
Cooling Time(min)	4	4	4	4	4	4
Cooling Temp.(°C)	550	550	550	550	550	550
Vacuum Start(°C)	550	550	550	550	550	–
Vacuum End(°C)	960	940	930	920	910	–

Note:

• Body* including Cervical, Opacious Dentine, Dentine, Enamel, Transparent, Effect, Gingiva.
• Our recommendation for firing temperature is based on numerous test. This firing parameters may be adjusted according to the peculiarities of different furnaces. It is essential to test firing before production.
• Please refer to "Instruction for Use" for details.

Universal Glaze

Type: With / Without Fluorescence

For: Zirconia, PFM & PFZ, and Glass Ceramic