IMPactiv P Impression Disinfectant Powder

Topdental Products Ltd. · #BOS9823 · source

Bossklein IMPactiv P is a class IIa registered medical device, designed to clean and disinfect dental impressions without affecting mould stability and shape. Each 700g tub of concentrated powder includes a measuring scoop for simple dilution and easy use.

Directions For Use

Dissolve 1 level measure of powder (20g ± 2g) in 980ml of warm tap water (30 - 40°C) and mix for 60 seconds. Place the impressions into the solution and fully immerse for the 60 second contact time. Do not exceed this recommended time. Rinse immediately with copious amounts of running water. Change solution daily. For professional use only.

Testing & Efficacy

EN 17111, EN14885, EN14476, EN13727, EN13697, EN13624.

Effective Spectrum & Exposure Times
Micro-Organism Contact Time
Bactericide 60 sec
Pseudomonas aeruginosa 60 sec
Enterococcus hirae 60 sec
Staphylococcus aureus 60 sec
MRSA 60 sec
E-Coli 60 sec
Yeasticidal 60 sec
Candida albicans 60 sec
Enveloped Viruses 60 sec
Hepatitis B virus (HBV) 60 sec
Hepatitis C virus (HCV) 60 sec
Human Immunodeficiency Virus (HIV) 60 sec
Influenza Virus 60 sec
Hepatitis Delta virus (HDV) 60 sec
Coronavirus 60 sec
Filoviridae (which includes Ebola virus) 60 sec
Rubella Virus 60 sec
Measles Virus 60 sec
Herpesviridae 60 sec
Rabies Virus 60 sec
Poxviridae 60 sec
Non-Enveloped Viruses
Adenovirus 5 60 sec
Norovirus 60 sec

Product Composition

TAED, Sodium Percarbonate, Citric Acid Monohydrate, Sodium Alkyl Aryl Sulphonate, Sodium Sulphate Anhydrous, Tetrasodium (1-hydroxyethylidene) bisphosphonate, Sodium Nitrite.

Packing Details

6 x 700g Tubs per box

Physical Properties

Free flowing powder, white in colour, pH 67.0-9.0, Shelf life of 3 years.

HTM 01-05 Compliance

7.1: Decontamination of these devices is a multi-step process to be conducted in accord with the device or material manufacturer's instructions. In general terms, the procedure will be as follows:

  1. Immediately after removal from the mouth, any device should be rinsed under clean running water. This process should continue until the device is visibly clean.
  2. All devices should receive disinfection according to the manufacturer's instructions. This will involve the use of specific cleaning materials

Hazard CLP & Disposal

Contraindications. Aluminium, Copper. Disposal. Do not discharge into drains or rivers.

Danger. Causes serious eye damage. May intensify fire; oxidiser. Harmful to aquatic life with long lasting effects. Wear eye protection, protective gloves. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a doctor. Storage. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep away from clothing and other combustible materials. Store in a well-ventilated place. Keep container tightly closed. Keep dry.

Product Information

ManufacturerTopdental Products Ltd.
pH6.7-9.0
ColorWhite
ScopeDental
Dilution1 level measure of powder (20g ± 2g) in 980ml of warm tap water (30 - 40°C)
Quantity700g Tub
Packaging6 x 700g Tubs per box
Shelf life3 years
ApplicationDisinfection of dental impressions
CompositionTAED, Sodium Percarbonate, Citric Acid Monohydrate, Sodium Alkyl Aryl Sulphonate, Sodium Sulphate Anhydrous, Tetrasodium (1-hydroxyethylidene) bisphosphonate, Sodium Nitrite
Contact Time60 seconds