Color Coded Rings, Large, 25 pcs/box — Green | ErgoDenta 5641G

Autoclavable, heat-resistant colour-code rings that let you identify and organise instruments at a glance. The large size fits extraction forceps and wider handles. 25 rings per box. Colour: Green.

Color-Code Rings — organize dental instruments by colour, procedure or clinician

Autoclavable silicone rings that slide onto any instrument handle. 2 sizes, 8 colours. Use them to encode procedure family, clinician, or sterilization week.

Two sizes — pick by handle width

• Small (50 pcs/box) — fits ~6–8mm hand-instrument handles. Scalers, curettes, probes, mirrors, composite instruments.
• Large (25 pcs/box) — fits ~8–11mm wider handles. Extraction forceps, elevators, surgical handles.

Eight colours — code your system

• Black · Yellow · Green · Blue · Light Blue
• Lavender · Red · White
• Sold per-colour, or as a Mixed Box (8 colours, one box)

Common color-coding workflows

• By procedure — green=perio · blue=restorative · red=surgery · yellow=endo · white=diagnostic
• By clinician — one colour per doctor in multi-doctor practices
• By sterilization week — rotate weekly to prove cycle

Sterilization-safe

• Medical-grade silicone, autoclavable to 134°C
• Compatible with B-class, gravity, and pre-vacuum cycles
• Colour is integral to silicone — no fade, no peel, no leach

Box options — single colour or mixed

• Small single-colour box — 50 pcs, one colour
• Large single-colour box — 25 pcs, one colour
• Mixed Small Box (5651) — 8 colours × 25 pcs = 200 rings
• Mixed Large Box (5641) — 8 colours × 12 pcs = 96 rings

How to fit — 30 seconds per instrument

• Pick the colour for the family or clinician
• Stretch ring over the working end
• Slide down to the grip area
• Done — stays put through every cycle

Reprocessing Instructions

Important: ErgoDenta instruments are supplied NON-STERILE and must be cleaned, disinfected, and sterilized before first use and after each subsequent use. Step 1: Pre-Cleaning Rinse under cold running water immediately after use. Remove visible debris with a soft brush. Keep instruments moist until processing. Step 2: Automated Cleaning Washer-disinfector: pre-rinse cold, enzymatic wash 55°C/10 min, thermal disinfect 90°C/5 min, dry. Step 3: Inspect & Maintain Check for residual soil, corrosion, or damage. Lubricate hinged instruments with medical-grade lubricant. Step 4: Package Place in ISO 11607-compliant sterilization pouches or wraps. Arrange to prevent tip contact. Seal properly. Step 5: Sterilize Autoclave at 134°C (273°F) for min. 18 minutes, pre-vacuum cycle. Validate with chemical and biological indicators. Step 6: Store Store in a clean, dry, enclosed area. Verify packaging integrity before use. Re-sterilize if compromised.